Tony Tucker Custom Cutter
- Boat REF# · 211331
- Length · 40'8"
- Year · 1998
- Construction · Aluminium
- Underwater profile · Bilge
- Sleeping berths · 7
- Engine · 1 x diesel 75hp, perkins 4236 (1997)
- Lying · larnaca
This boat is off the market but here are some boats that are still For Sale
Extra Details
Designer | Tony Tucker / Tim Drury |
---|---|
Lying | larnaca |
Fuel capacity | 90.2 USG Total - 3 Tanks |
Water capacity | 220.0 USG Total - 1 Tanks |
Holding tank capacity | 220.0 USG Total - 1 Tanks |
Mechanical
Engine | 1 x diesel 75hp |
---|---|
Engine make and model | perkins 4236 (1997) |
Engine Hours |
engine1= 940 |
Engine Cooled | Indirect |
Steering | wheel |
Drive | shaft |
Prop(s) | 3 blade Bronze |
Fuel consumption (approx) | 1.8 USG /hour At Cruising Speed |
Cruising speed (approx) | 6 knots |
Max speed (approx) | 12 knots |
Generator output | 5KVA |
Engine spares |
---|
Dimensions
Length | 40'8" |
---|---|
Beam | 13'9" |
Draft Min | 6'7" |
Airdraft | 56'0" |
Displacement | 26,460.0lbs |
Headroom | 6'2" |
Storage | On marina |
Rig
Cutter rigged Sailspar Aluminium spars (1998) with Stainless Steel standing rigging (1998)
Sails
Reefing mainsail | Fleetwood sail - (1998) Fully Battened, Lazy Jacks, |
---|---|
Headsail | Fleetwood - Furling (1998) |
Other sails | fore staysail (1998) |
Spinnaker (1998) | |
Spinnaker (1998) |
Spinnaker gear |
---|
mainsail in need of new stitching due to UV damage
Electrical Systems
12 volt battery, 4 batteries charged by: engine, shore power, generator
Construction
Construction | Aluminium |
---|---|
Underwater profile | Bilge |
Finish | 2 pack finish |
Accommodation
Total # of berths | 7 |
---|---|
No. of double berths | 3 |
No. of single berths | 1 |
Cabin(s) | 3 |
Sink | 2 |
Shower | 2 |
Air conditioning | 1 Air conditioning Units |
4 burner propane Stove
Accommodation
Stove | |
---|---|
Broiler | |
Oven | |
Sink | |
Refrigerator | |
Carpet | |
Air conditioning | |
Cabin heating | |
Pressurised water system | |
Hot water system | |
Microwave |
4 burner propane Stove
Deck Gear
Sail cover | |
---|---|
Bimini | |
Rode | |
Fenders | |
Boathook | |
Davits | |
Instrument Covers |
2 halyard winches
3 sheet winches
Electric Lofrans windlass (with remote control)
7 anchors
(various)
65'7" of chain
196'10" of rode
dinghy (1998)
(Inflatable)
0hp outboard, yamaha, Short shaft ()
Nav Equipment
Compass | |
---|---|
Speed | |
Log | |
Wind | |
Radar | |
VHF | |
GPS | |
Chart plotter | |
Autopilot | |
Stereo | |
Clock | |
Barometer | |
Navigation lights | |
TV | |
Depth sounder | |
Radar Reflector |
Safety Equipment
Fume detector | |
---|---|
Gasolene Detector | |
Liferaft | |
Life jackets | |
Life buoys | |
Searchlight | |
Safety harnesses | |
Horn | |
Swim ladder | |
Emergency steering |
5 bilge pumps (1 manual / 4 electric)
Broker's Comments
This is a Tony Tucker/Tim Drury designed Aluminium hull cutter that is built for open water cruising.
She has a nice wide beam and comfortable saloon and cockpit. The owners cabin has en-suite facilities and there is another heads in the Saloon complete with shower unit.
Whilst she is in need of some updating and TLC she has been priced to sell .
Now reduced further due to change in personal circumstances.